why not just unscrew the top.....instead of wasting all that time makin sure u dnt spill ink when ur pouring it into that small hole...most paint markers screw off top...does that one
^^^^bastard lol you should be able to unscrew the top possibly(cant tell what type of marker it is from the pic sorry). Try turning it both ways, 1st counter clockwise then the opposite way.(the top may be glued so use pliers if you need too). Then dump out and clean ( you may wanna save the lil bb's in it for mixxers later on. Like stated b4 i cant tell what brand it is so im not a 100 percent sure, but they look like they should unscrew.
when i use scotch pads i usually use a lil electrical shape to hold it in the rolled up shape i want, then when i slide the nib in i put a lil super glue around the electrical tape to hold it in. if u want to be able to re-use it. use more electrical tape so its thicker and a tighter fit in the mop. if u really wanted to insted of super glue u coulde use wax and melt it around it to seal it off
I dont use anything. Just make the scotch pad a little bit bigger and just stick it in there. It shouldnt fall in and it stays in place.
wat you do is get some acrylic paint and mix it with a little paint thinner till desired thickness and then get a glue pen that you can get at any arts and crafts store and then take the nib off the top and pour in the paint and then you got a makeshift ON-THE-RUN.
^well you are a retard... 1. paint thinner is for oil based paints, not acrylic, so you would use water 2. if your talkign about the 2 way glue markers, then you are more retarded, because paint does nooottt flow well through marker nibs. 3. either way, everyone already knows that, so nice job goign off topic to re-state a well known idea
if i put ratio of 50:50 paint and xylene to thin the paint into my bingo marker will that shit melt? if it does how long would it take until to do it? cuz i dont want it to