take a pilot and a saw like a hand saw r watever and cut it in half or desired size, then cut of the very bottum, sodder or tape the bottom back on the peice u cut earlier and boom, u got a mini jumbo pilot.
yeah i did that also its a good idea, accept im sure i did it before this MASSIVE toy. hahha but tape dont work well
to fix it,take the felt in side out.find a sock and stuff it in.cram it in actually.not too small because itll leak.then fill it in.cause the felt will be too big to fit in the chamber.
are scrawl pens worth the buy or 50mm???? i dont really have many places to use 50mms though or any way to refill my solid???? i used it in one day
iight, get a roller deodrant, take out the ball with a screwdriver (it should just pop out), then empty the contents and clean out the container, then dry it, then cut a generous sized bit of material off a thick sock, plug it in the part where the ball was, if it fits tightly and snug then take the sock out, fill up the container with your desired contents( i like to use thinned out black metal paint with a bit of the deodrant in it because it leaves a crazy ghost tag), then after you have filled it with your ink, plug the sock back into the part wear the roller ball was, then turn the whole thing upside down until the sock nib becomes juicy( you may want to do this over a toilet or outside on some grass so you don't stain your floor or whatever), so when the nib is juicy turn the thing back upright, screw on the top and you are ready to crush!! h34r:
u should get the sakura paint marker that shit is a beauty u get like the highligher color and that shit stands the fuck out of shit plus u can write on like anything since its like a super crayon
ive said it before and ill say it again: MOLOTOW IS SCAMMING OTR the new molotow markers on the bombingscience shop are a ripoff, they stole designs from otr. i know alot of you dont like otr, but if you know the history, otr is a mag that has been around since 1991 and they produced really the first meant for graffiti markers. theyve been down since before most of you started writing period. dont support the new molotow markers. im not saying dont buy from the BS store, but basically any markers labelled under molotow are ripoffs of otr designs because molotow wanted a rediculous cut of the profit and otr couldnt afford it. otr has new markers coming out too, and molotow plans on stealing those designs including the streetduster and the new gravity style marker with a .6 inch round nib instead of a chisel. i was planning on getting both of those, but if they debut under the molotow name i will not.. do not support scam artists. molotow markers, german montana paint, etc.
a while ago i posted about the glue pen , and i finally got it working nice. For a nib i just used soft felt from a cheapie chalk board eraser, then used some elmers glue around the the felt to seal it. This is a good marker its easy to make ,not to messy,and has controllable drips.
I dont have alot to offer (and i think i posted before) but the easiest marker modification that makes a differences is this. Most paint markers are chisel tipped, but if you pull the tip out and flip it over its round. Then smash the tip into the ground a few times. This will make the tip broader, softer, and will let more ink pass thru. Then crush the back of the marker with ur fingers alittle to push the ink up and build pressure. It simple and you can get pretty drippy tags with it. My recommendation are Mitsubishi Paint markers or Pilots i guess.
ok i got a question about mops i think this was asked alot of times but fuck it, why every time i put some homemade ink in to a mop or any ink even straight up garvey the mib puffs up so fucking much, is it just that the ink is really thinn or what?
smashing up paint marker nibs works really good. its my favorite for things that fit in your pocket without bulging out all crazy like when you have a huge mop. and when you juice up the nib to a mop, its always gonna expand, like a sponge. there really isnt a good way to prevent it, maybe you could get it to stay kind of smaller with a rubberband but it would probly put pressure on the seam and the nib would fall off where its glued on a hell of alot faster.
here is a picture of the new otr markers, the "streetduster" is supposed to be out right now, probly in shops within a month or so if everything goes smoothly. View attachment 220133 supposedly molotow plans on copying these or already has, and so you know i got the picture off of 12oz you can also visit www.ontherun.de for more information, and wholesale ordering and heres some hotfire marker pictures for those of you who dont know, from some book, i got the pictures from 12oz also. markers arent hard to make: [Broken External Image]:http://homepage.ntlworld.com/ingerson/pens8.jpg [Broken External Image]:http://homepage.ntlworld.com/ingerson/pens7.jpg [Broken External Image]:http://homepage.ntlworld.com/ingerson/pens6.jpg [Broken External Image]:http://homepage.ntlworld.com/ingerson/pens5.jpg [Broken External Image]:http://homepage.ntlworld.com/ingerson/pens4.jpg [Broken External Image]:http://homepage.ntlworld.com/ingerson/pens3.jpg [Broken External Image]:http://homepage.ntlworld.com/ingerson/pens2.jpg [Broken External Image]:http://homepage.ntlworld.com/ingerson/pens1.jpg magnums?! smith mustve been so toy! omgzorz roflbrothel!